Skip to main content
YSTRAL Jet Stream Mixers

YSTRAL Jetstream Mixer

High circulation capacity of the rotor-stator principle.

YSTRAL Leitstrahlmischer

YSTRAL Jetstream Mixer

High circulation capacity of the rotor-stator principle.

Effective micro and macro-mixing are crucial for achieving consistent product quality in a wide variety of applications. The YSTRAL Jet Stream Mixers satisfies all the requirements for complete and homogeneous mixing of the container contents.
The YSTRAL Jetstream Mixer proves that cost efficiency, an optimum mixing profile and easy-of-use are not incompatible.

Advantages of the YSTRAL Jet Stream Mixers

  • Effective micro and macro mixing of the complete container contents without air ingress 
  • Complete mass transfer across all tank levels through vertical mixing 
  • Up to 90% of the energy used is converted into a vertical flow - no rotating container contents
  • Even heavy sediments are suspended via targeted currents
  • Rotating parts are protected against unintended access
  • No vortex formation and no air ingress
  • Tank installation from above or laterally, or operation on the lifting frame
  • Not necessary to secure open containers
     

Functionality of the YSTRAL Jet Stream Mixers

  • A fast turning rotor, surrounded by a deflector tube (stator), creates a downward flowing jet that directs fluid stream straight to the bottom of the container.
  • Once at the container bottom, the stream splits and creates an upward flow along the outside wall.
  • At the surface of the fluid stream is redirected towards the container bottom.

Technical data

Power: 0.5 – 55 kW
Voltage: 230 / 400 V, 50 / 60 Hz, custom voltages
Speed: 750 / 1.500 min-1, 1.500 / 3.000 min-1 stepless up to 3,600 min-1 with frequency converter
Seal: Lip seal, mechanical seal single or double depending on application condition
Options: Explosion-resistant design, certificate, qualifications
diving part: Stainless steel 1.4404 (AISI 316 L), special material
Bearing flange: Aluminium-coated, stainless steel 1.4404 (AISI 316 L)
Power: 0.5 – 55 kW
Voltage: 230 / 400 V, 50 / 60 Hz, custom voltages
Speed: 750 / 1.500 min-1, 1.500 / 3.000 min-1 stepless up to 3,600 min-1 with frequency converter
Seal: Lip seal, mechanical seal single or double depending on application condition
Options: Explosion-resistant design, certificate, qualifications
diving part: Stainless steel 1.4404 (AISI 316 L), special material
Bearing flange: Aluminium-coated, stainless steel 1.4404 (AISI 316 L)

Downloads

Contact

Or contact us via: