Skip to main content
YSTRAL Jet Stream Mixers

YSTRAL Jetstream Mixer

High circulation capacity of the rotor-stator principle.

YSTRAL Jet Stream Mixers

YSTRAL Jetstream Mixer

High circulation capacity of the rotor-stator principle.

Effective micro and macro-mixing are crucial for achieving consistent product quality in a wide variety of applications. The YSTRAL Jetstream Mixers satisfies all the requirements for complete and homogeneous mixing of the container contents.<br/> The YSTRAL Jetstream Mixer proves that cost efficiency, an optimum mixing profile and easy-of-use are not incompatible.

Advantages of the YSTRAL Jetstream Mixers

  • Effective micro and macro mixing of the complete container contents without air ingress 
  • Complete mass transfer across all tank levels through vertical mixing 
  • Up to 90% of the energy used is converted into a vertical flow - no rotating container contents
  • Even heavy sediments are suspended via targeted currents
  • Rotating parts are protected against unintended access
  • No vortex formation and no air ingress
  • Tank installation from above or laterally, or operation on the lifting frame
  • Not necessary to secure open containers
     

Functionality of the YSTRAL Jetstream Mixers

  • A fast turning rotor, surrounded by a deflector tube (stator), creates a downward flowing jet that directs fluid stream straight to the bottom of the container.
  • Once at the container bottom, the stream splits and creates an upward flow along the outside wall.
  • At the surface of the fluid stream is redirected towards the container bottom.

Technical data

Power: 0.5 – 55 kW
Voltage: 230 / 400 V, 50 / 60 Hz, custom voltages
Speed: 750 / 1.500 min-1, 1.500 / 3.000 min-1 stepless up to 3,600 min-1 with frequency converter
Seal: Lip seal, mechanical seal single or double depending on application condition
Options: Explosion-resistant design, certificate, qualifications
diving part: Stainless steel 1.4404 (AISI 316 L), special material
Bearing flange: Aluminium-coated, stainless steel 1.4404 (AISI 316 L)
Power: 0.5 – 55 kW
Voltage: 230 / 400 V, 50 / 60 Hz, custom voltages
Speed: 750 / 1.500 min-1, 1.500 / 3.000 min-1 stepless up to 3,600 min-1 with frequency converter
Seal: Lip seal, mechanical seal single or double depending on application condition
Options: Explosion-resistant design, certificate, qualifications
diving part: Stainless steel 1.4404 (AISI 316 L), special material
Bearing flange: Aluminium-coated, stainless steel 1.4404 (AISI 316 L)

Downloads

Contact

Or contact us via: