Skip to main content
YSTRAL Dispermix

YSTRAL Dispermix

Mixing and dispersing in a single operation

The YSTRAL Dispermix is used when the powder/liquid-to-liquid mixing is insufficient and a shear ring dispersion is too intense. The Dispermix subjects the container contents to vertical intensive mixing in the micro and macro range whilst dispersing the product in the same operation. Additional downstream sheer-ring dispersion is omitted.

With its optimal mixing/ dispersion performance, higher economic potential and easy-to-use mixing tools, the Dispermix meets the demanding requirements of high-end production processes to induct liquids or powders into liquid.

Advantages of the YSTRAL Dispermix

  • Effective micro and macro mixing of the complete container contents without air ingress
  • Simultaneous comminution of agglomerates and therefore improved wetting of powder with liquid
  • Heavy sediments are also suspended and dispersed
  • Different slot widths allow adaptation to the corresponding application
  • Rotating parts are protected against unintended access
  • Tank installation from above, below or laterally or operation on the lifting frame

The YSTRAL Dispermix works likes this

  • Functionality of the YSTRAL Dispermix The Dispermix Head generates two different fluid streams.
  • A vertical sub-stream is directed directly to the tank bottom where it is split and circulates the contents of the entire tank.
  • A second sub-stream is deflected horizontally in the Dispermix head and passes through the dispersion zone. Solid components and/or drops are reliably comminuted and distributed homogeneously

Technical data

Power: 0,5 – 55 kW
Voltage: 230 / 400 / 500 V, 50 Hz, custom voltages possible
Speed: 750 / 1.500 min-1, 1,500 / 3,000 min-1 stepless up to 3,600 min-1 with frequency converter
Seal: Lip seal, mechanical seal single or double depending on application condition
Options: Explosion-resistant design, certificate, qualifications
diving part: Stainless steel 1.4404 (AISI 316 L), special material
Bearing flange: Aluminium coated, 1.4404 (AISI 316 L)
Power: 0,5 – 55 kW
Voltage: 230 / 400 / 500 V, 50 Hz, custom voltages possible
Speed: 750 / 1.500 min-1, 1,500 / 3,000 min-1 stepless up to 3,600 min-1 with frequency converter
Seal: Lip seal, mechanical seal single or double depending on application condition
Options: Explosion-resistant design, certificate, qualifications
diving part: Stainless steel 1.4404 (AISI 316 L), special material
Bearing flange: Aluminium coated, 1.4404 (AISI 316 L)

Downloads

YSTRAL MILLING DISPERMIX

The YSTRAL Milling Dispermix shreds and disperses fat and wax blocks in two steps.
First, the machine is started in reverse rotation, whereby the blocks are sucked from below into the protruding rotor blades - the blocks are milled into small pieces.
In the second step, the direction of rotation of the machine is changed and the product is processed via the Dispermix head. This subjects the container contents to intensive mixing in the micro and macro range whilst dispersing the product fully in the same operation. This therefore accelerates the melting and dissolving processes.

YSTRAL HIGH-SHEAR-DISPERMIX

The YSTRAL High-Shear Dispermix generates even higher shearing forces compared to the YSTRAL Dispermix. 

The high-shear Dispermix head subjects the container contents to intense mixing and disperses the product at high energies in a single process.

Contact

Or contact us via: