Skip to main content
YSTRAL Conti-TDS
YSTRAL Conti-TDS

The No. 1 in powder wetting

YSTRAL Conti-TDS

YSTRAL Conti-TDS

Induct, wet and disperse powder

Increase the economic potential of your processes with YSTRAL Conti-TDS: Dust and loss-free container emptying, powder transport and addition, wetting and dispersion up to complete de-agglomeration can all be implemented using a single machine.

With YSTRAL Conti-TDS, powders are not only wetted, but dispersed in the liquid under vacuum. This inline mixing process avoids agglomeration. This offers you an optimised result with a better breakdown, higher raw materials efficiency and higher product quality.

YSTRAL Conti-TDS offers you excellent advantages

  • The combination of different process steps in one machine provides you with great rationalisation potential: Production times are minimised, sub-processes are completely eliminated, production costs are reduced.
  • Clean manufacturing process thanks to a dust and loss-free powder feed, even with powders that are difficult to wet, sticky or dusty
  • Aspirating and dispersing of powders directly from silo (via buffer hopper), big bag, hopper, sack, barrel etc.
  • No glued containers or built-in parts
  • Fast and reproducible production of the products thanks to the immediate and complete breakdown of raw materials
  • Inline Mixing: No ingress of external air, powder conveying under vacuum in dense stream

Aspirating and dispersing of powders directly from silo (via buffer hopper), big bag, hopper, sack, barrel etc.

ystral suction house
Suction House
ystral bag tipping table
Bag Tipping Table
ystral powder silo
Receiving Hopper
ystral Big Bag emptying station
Big-Bag Emptying Station
ystral bag tipping station
Bag Tipping Station
ystral silo truck
Silo Truck

This is how the YSTRAL Conti-TDS works

  • The YSTRAL Conti-TDS is based on the same principle as the YSTRAL Inline Disperser.
  • A special rotor-stator system generates a large negative pressure and absorbs powder, without dust formation and loss-free, directly into the liquid.
  • The inducted powder is dispersed immediately and under high shear.
ystral Conti-TDS
ystral Conti-TDS

Technical data

Power: 5.5 – 250 kW
Voltage: 230 / 400 / 500 V, 50 Hz, custom voltages possible
Speed: 1.500 / 3.000 min-1 stepless up to 3,600 min-1 with frequency converter
dispersion chamber: Stainless steel 1.4404 (AISI 316 L), special material, swappable tools, quick release
Liquid throughput: 10 - 200 m3/h
Maximum viscosity: 200,000 mPas (subject to size and use in the machine)
Seal: Configuration acc. requirements
Options: Explosion-resistant design, certificate, qualifications
Suction power powder: up to 24 t/h
Power: 5.5 – 250 kW
Voltage: 230 / 400 / 500 V, 50 Hz, custom voltages possible
Speed: 1.500 / 3.000 min-1 stepless up to 3,600 min-1 with frequency converter
dispersion chamber: Stainless steel 1.4404 (AISI 316 L), special material, swappable tools, quick release
Liquid throughput: 10 - 200 m3/h
Maximum viscosity: 200,000 mPas (subject to size and use in the machine)
Seal: Configuration acc. requirements
Options: Explosion-resistant design, certificate, qualifications
Suction power powder: up to 24 t/h

Certifications

3A certification
3-A Sanitary Standard
3A certification
3-A Sanitary Standard

Downloads

Contact

Or contact us via:

For service and spare parts requests: